today we’re taking a look at a motorized sit-stand desk…Adjustable Desk Flexispot… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s very durable and can hold a lot of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and fast, but it’s likewise remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are much more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t always a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this implied it was going to be strong) and likewise a little hesitant (because we all know how much of an obstacle putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When assembled, I love the sleek look of this desk. I’m confident any of the many varied surfaces that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as sometimes as you desire throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as near that as I might on uplifts site with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outdoors container
for the desktop was not harmed in any way which is absolutely bizarre since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had bought this I ‘d have been on the phone with client service instantly they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the double stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable does not mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed also my plan for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at best feels like a cheaper imitation of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their website also which also feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering different options and accessories I could however I think I’m better that they just sent a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the relocation when the core product isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Adjustable Desk Flexispot
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and performance but I would spend the additional money it’s gon na require to enter into a higher end maker like uplift desk or extremely desk and I haven’t personally utilized very desk items so I can’t speak on it but their track record is very good huge thanks to flexi spot for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters got here damaged but from a client perspective you ‘d most likely be truly delighted to get this in