today we’re taking a look at a motorized sit-stand desk…Amazon Flexispot Sit-stand… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. If you do not believe me, check out the video listed below of it running while there’s a person resting on it.
The electrical raise/lower function is not only easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much thought.
On top of being practical, it also looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise valuable if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (since this suggested it was going to be strong) and likewise a little hesitant (because all of us understand how much of an obstacle assembling furnishings can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or wish to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near that as I might on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must know by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough guy if I had actually bought this I ‘d have been on the phone with customer care instantly they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed too my prepare for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a cheaper replica of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to check out their website as well which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous options and accessories I might however I believe I’m better that they just sent out a standard desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of bonus is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Amazon Flexispot Sit-stand
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the extra money it’s gon na require to enter into a greater end maker like uplift desk or really desk and I haven’t personally used very desk products so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for review unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged but from a client viewpoint you ‘d most likely be really thrilled to get this in