today we’re taking a look at a motorized sit-stand desk…Are Flexispot Desks Any Good… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you don’t believe me, take a look at the video listed below of it operating while there’s an individual resting on it.
The electric raise/lower feature is not only easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this meant it was going to be strong) and likewise a little hesitant (because all of us know just how much of an obstacle putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When assembled, I like the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it can be found in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as lot of times as you want throughout the day.
Last but not least, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as close to that as I could on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you need to understand by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is utterly unusual because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had actually purchased this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one benefit I would offer this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but more affordable does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged too my plan for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable imitation of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to check out their website also which also feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering different alternatives and accessories I might but I think I’m happier that they only sent out a standard desk because as a basic desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of extras is the relocation when the core product isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Are Flexispot Desks Any Good
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance however I would spend the money it’s gon na take to enter a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used extremely desk items so I can’t speak on it however their credibility is very good big thanks to flexi area for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters got here harmed however from a customer standpoint you ‘d probably be really excited to get this in