today we’re taking a look at a motorized sit-stand desk…Cmp502 Flexispot… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s super durable and can hold a lot of weight. If you do not believe me, have a look at the video below of it operating while there’s a person resting on it.
The electric raise/lower function is not only easy to use and quick, but it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being functional, it likewise looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are much more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this implied it was going to be durable) and likewise a little reluctant (because we all know how much of a challenge assembling furniture can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the streamlined appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or wish to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as close to that as I could on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you must understand by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is absolutely strange since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had bought this I ‘d have been on the phone with customer service instantly they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual stage dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable does not suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest seems like a more affordable imitation of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their site as well which likewise feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering various alternatives and accessories I could however I believe I’m happier that they just sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of additionals is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Cmp502 Flexispot
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency but I would spend the money it’s gon na take to enter a greater end maker like uplift desk or really desk and I haven’t personally used extremely desk items so I can’t speak on it however their credibility is very good huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed however from a client viewpoint you ‘d most likely be really excited to get this in