today we’re taking a look at a motorized sit-stand desk…Deskcise-protm-flexispot… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you do not think me, take a look at the video below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not only easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more economical than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (because this suggested it was going to be sturdy) and likewise a little reluctant (due to the fact that all of us know just how much of an obstacle assembling furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When assembled, I like the streamlined appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near that as I might on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you need to understand by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had bought this I ‘d have been on the phone with client service instantly they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any type of cable management products whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but less expensive does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my prepare for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at finest seems like a less expensive imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their site also which also feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering different options and accessories I might but I believe I’m better that they just sent a standard desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of bonus is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is five years and uplift desk is 7 years if you are Deskcise-protm-flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the money it’s gon na require to enter a higher end producer like uplift desk or really desk and I have not personally used very desk products so I can’t speak on it however their credibility is great big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged but from a customer viewpoint you ‘d probably be really delighted to get this in