today we’re having a look at a motorized sit-stand desk…E6 Flexispot… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. If you do not think me, check out the video below of it running while there’s an individual resting on it.
The electric raise/lower feature is not only easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being functional, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also useful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The practical cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this suggested it was going to be tough) and likewise a little reluctant (due to the fact that we all understand how much of an obstacle putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I enjoy the sleek look of this desk. I’m confident any of the many varied surfaces that it is available in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as lot of times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or wish to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I tried to get as near to that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you need to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get lacking even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is entirely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had bought this I ‘d have been on the phone with customer service right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual stage dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged as well my prepare for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at best feels like a more affordable replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to take a look at their website too which likewise feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering different alternatives and accessories I could however I believe I’m happier that they only sent a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are E6 Flexispot
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the extra money it’s gon na take to get into a greater end maker like uplift desk or really desk and I haven’t personally utilized very desk items so I can’t speak on it however their track record is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed however from a customer standpoint you ‘d probably be actually delighted to get this in