today we’re having a look at a motorized sit-stand desk…E7 Flexispot… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. If you do not believe me, check out the video listed below of it running while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much idea.
On top of being practical, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how tough the Flexispot is.
The convenient cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this indicated it was going to be strong) and likewise a little hesitant (because all of us know just how much of a challenge putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the smooth appearance of this desk. I’m confident any of the many diverse finishes that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as many times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty basic I tried to get as close to that as I could on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should understand by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for travel through the outside container
for the desktop was not damaged in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with customer support right away they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly definitely where any sort of cable management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged also my prepare for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at best feels like a more affordable replica of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their website as well which also feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering different alternatives and devices I might however I think I’m happier that they just sent out a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a lot of bonus is the relocation when the core item isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is 7 years if you are E7 Flexispot
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and productivity however I would invest the additional money it’s gon na require to enter into a greater end producer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it however their credibility is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d probably be actually thrilled to get this in