today we’re having a look at a motorized sit-stand desk…Eg8 Flexispot… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. Examine out the video listed below of it running while there’s an individual lying down on it if you don’t think me.
The electric raise/lower function is not just easy to use and fast, but it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also practical if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this implied it was going to be strong) and likewise a little reluctant (due to the fact that all of us understand just how much of a difficulty assembling furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I love the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near to that as I might on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is entirely strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough guy if I had actually bought this I ‘d have been on the phone with customer service immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual stage double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged also my plan for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at finest seems like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their site too which also feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various alternatives and devices I might however I believe I’m happier that they just sent a standard desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a bunch of extras is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Eg8 Flexispot
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance but I would invest the additional money it’s gon na require to enter a greater end producer like uplift desk or really desk and I haven’t personally used extremely desk items so I can’t speak on it however their credibility is excellent huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed but from a client perspective you ‘d probably be actually delighted to get this in