today we’re taking a look at a motorized sit-stand desk…Ek2 Flexispot… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very strong and can hold a lot of weight. If you do not believe me, check out the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower feature is not only easy to use and quick, but it’s likewise remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being practical, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this suggested it was going to be tough) and also a little reluctant (because we all understand just how much of a difficulty assembling furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I like the streamlined look of this desk. I’m confident any of the many diverse surfaces that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as lot of times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I might on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you need to know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough male if I had bought this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% more affordable even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift however more affordable doesn’t indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their site also which likewise feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering different options and devices I could however I believe I’m better that they only sent a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a lot of additionals is the move when the core item isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is 7 years if you are Ek2 Flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and performance however I would spend the additional money it’s gon na require to enter a greater end manufacturer like uplift desk or very desk and I haven’t personally utilized really desk products so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a customer viewpoint you ‘d most likely be actually delighted to get this in