today we’re taking a look at a motorized sit-stand desk…F3 Compact Sit Stand Flexispot… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to put together, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Inspect out the video below of it operating while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and quickly, but it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how sturdy the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (considering that this suggested it was going to be strong) and also a little hesitant (since all of us understand just how much of a difficulty assembling furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I love the sleek look of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as often times as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or wish to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near to that as I could on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you must know by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely unusual since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had acquired this I ‘d have been on the phone with customer service immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function oddly definitely where any sort of cable management products whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed as well my plan for this desk at this moment is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at finest seems like a cheaper replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website as well which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various choices and accessories I could however I believe I’m better that they just sent a fundamental desk since as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is seven years if you are F3 Compact Sit Stand Flexispot
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance however I would invest the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I have not personally used really desk items so I can’t speak on it however their credibility is excellent big thanks to flexi spot for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged but from a consumer standpoint you ‘d most likely be truly excited to get this in