today we’re having a look at a motorized sit-stand desk…Flexispot スタンディングデスク… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electrical raise/lower feature is not just easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being functional, it also looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The practical cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (because this indicated it was going to be durable) and also a little hesitant (since all of us know how much of a difficulty putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I like the sleek appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to take a nap on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as close to that as I could on uplifts site with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you must know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get lacking even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had acquired this I ‘d have been on the phone with customer care immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely definitely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double stage dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however more affordable doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged as well my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive replica of that it simply does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their website as well which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various options and devices I might however I think I’m better that they just sent out a basic desk since as a basic desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of bonus is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot スタンディングデスク
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and performance however I would spend the additional money it’s gon na require to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally used really desk items so I can’t speak on it but their track record is excellent huge thanks to flexi area for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed but from a client perspective you ‘d probably be really excited to get this in