today we’re having a look at a motorized sit-stand desk…Flexispot 100Cm… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Inspect out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not just easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are much more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this suggested it was going to be sturdy) and also a little reluctant (because we all know how much of a challenge putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once assembled, I enjoy the streamlined appearance of this desk. I’m positive any of the many varied finishes that it is available in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as often times as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to sleep on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as close to that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you must understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable television grommets for pass through the outside carton
for the desktop was not damaged in any way which is absolutely bizarre since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had purchased this I ‘d have been on the phone with customer care immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but less expensive does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed also my prepare for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their site too which likewise feels eerily comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering numerous options and accessories I might but I believe I’m better that they just sent a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of bonus is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot 100Cm
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance however I would invest the extra money it’s gon na take to enter into a higher end manufacturer like uplift desk or really desk and I have not personally used very desk items so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d most likely be truly excited to get this in