today we’re taking a look at a motorized sit-stand desk…Flexispot 120 X 80… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. If you don’t believe me, take a look at the video listed below of it operating while there’s an individual lying down on it.
The electric raise/lower feature is not just easy to use and quick, however it’s also remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being functional, it also looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also valuable if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a consequence of how tough the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this indicated it was going to be tough) and likewise a little reluctant (because all of us understand just how much of an obstacle putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the smooth look of this desk. I’m confident any of the many varied surfaces that it can be found in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty standard I attempted to get as near to that as I could on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you ought to understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough man if I had acquired this I ‘d have been on the phone with customer care immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually absolutely where any type of cable management materials whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control board that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed as well my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to take a look at their site as well which likewise feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering different alternatives and accessories I might however I believe I’m happier that they just sent a standard desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of bonus is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot 120 X 80
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the additional money it’s gon na take to enter a greater end manufacturer like uplift desk or extremely desk and I haven’t personally utilized really desk products so I can’t speak on it however their reputation is very good big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a client standpoint you ‘d most likely be actually delighted to get this in