today we’re having a look at a motorized sit-stand desk…Flexispot 120… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. If you don’t believe me, check out the video below of it operating while there’s a person resting on it.
The electric raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much idea.
On top of being functional, it also looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also handy if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (since this implied it was going to be sturdy) and likewise a little reluctant (due to the fact that all of us understand just how much of a challenge putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the smooth appearance of this desk. I’m positive any of the many diverse finishes that it is available in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as near to that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you need to know by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not harmed in any way which is entirely bizarre because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had actually acquired this I ‘d have been on the phone with customer care immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly definitely where any kind of cable management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one benefit I would give this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you update this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my prepare for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a cheaper replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their website too which likewise feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering different options and devices I could however I think I’m happier that they only sent a fundamental desk because as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of extras is the move when the core item isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot 120
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and productivity however I would spend the money it’s gon na require to get into a greater end producer like uplift desk or very desk and I have not personally used extremely desk products so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed however from a customer perspective you ‘d probably be truly delighted to get this in