today we’re taking a look at a motorized sit-stand desk…Flexispot 35″ Desk Riser… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. If you do not think me, take a look at the video below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quick, but it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being practical, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are far more affordable than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The hassle-free cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this implied it was going to be sturdy) and also a little hesitant (because we all understand how much of an obstacle putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the sleek appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as sometimes as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or want to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I might on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you need to know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable television grommets for travel through the outside carton
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough male if I had actually purchased this I ‘d have been on the phone with customer care immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any type of cable management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged too my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at finest seems like a cheaper replica of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which likewise feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering different choices and devices I could but I think I’m better that they only sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of additionals is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot 35″ Desk Riser
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency but I would invest the extra money it’s gon na take to enter a greater end maker like uplift desk or really desk and I haven’t personally used extremely desk products so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed but from a customer viewpoint you ‘d probably be really excited to get this in