today we’re having a look at a motorized sit-stand desk…Flexispot 35 Inch… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t think me, have a look at the video below of it running while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being practical, it also looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this implied it was going to be tough) and also a little hesitant (because all of us understand just how much of a difficulty assembling furniture can be).
The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined look of this desk. I’m positive any of the many diverse surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty basic I tried to get as close to that as I could on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you need to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for go through the outdoors carton
for the desktop was not damaged in any way which is utterly strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had actually purchased this I ‘d have been on the phone with client service immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed also my prepare for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at finest seems like a cheaper imitation of that it simply doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their site as well which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering various choices and devices I might but I think I’m happier that they only sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of extras is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot 35 Inch
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity however I would spend the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or very desk and I have not personally used extremely desk items so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a customer standpoint you ‘d most likely be really delighted to get this in