today we’re taking a look at a motorized sit-stand desk…Flexispot 35 Standing Desk Discount… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s very durable and can hold a lot of weight. Examine out the video listed below of it running while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and quick, however it’s also remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much idea.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise handy if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The practical cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this implied it was going to be strong) and also a little hesitant (because all of us know just how much of a challenge putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When assembled, I like the streamlined look of this desk. I’m positive any of the many varied surfaces that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I could on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you need to understand by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had purchased this I ‘d have been on the phone with customer care instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely definitely where any sort of cable management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but more affordable does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged as well my plan for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at best feels like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their site too which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering different alternatives and accessories I might but I think I’m happier that they only sent a fundamental desk because as a basic desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a bunch of additionals is the move when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot 35 Standing Desk Discount
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity however I would spend the money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I haven’t personally used extremely desk items so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters got here harmed but from a client standpoint you ‘d most likely be truly thrilled to get this in