today we’re taking a look at a motorized sit-stand desk…Flexispot 35 Wide… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you do not believe me, check out the video below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (since this indicated it was going to be strong) and also a little hesitant (because we all understand just how much of an obstacle assembling furniture can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I enjoy the smooth look of this desk. I’m confident any of the many varied surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I attempted to get as close to that as I could on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you should understand by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely unusual since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had acquired this I ‘d have been on the phone with customer service right away they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but less expensive doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my prepare for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at best feels like a more affordable replica of that it just does not feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their website as well which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering various alternatives and accessories I could however I believe I’m happier that they only sent out a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of bonus is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot 35 Wide
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and efficiency but I would invest the additional money it’s gon na require to enter a greater end manufacturer like uplift desk or very desk and I have not personally utilized extremely desk items so I can’t speak on it however their reputation is excellent big thanks to flexi area for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged however from a customer perspective you ‘d most likely be really delighted to get this in