today we’re taking a look at a motorized sit-stand desk…Flexispot 42… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Inspect out the video below of it running while there’s a person lying down on it if you do not think me.
The electric raise/lower feature is not just easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much idea.
On top of being practical, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also valuable if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this suggested it was going to be tough) and also a little reluctant (since we all know just how much of an obstacle putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I enjoy the smooth appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I could on uplifts website with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you must understand by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get lacking even any cable grommets for pass through the outdoors container
for the desktop was not damaged in any way which is absolutely unusual due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had purchased this I ‘d have been on the phone with customer support right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly absolutely where any sort of cable television management materials whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual stage double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged also my plan for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at best feels like a cheaper replica of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their website as well which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering different alternatives and accessories I might but I think I’m happier that they only sent a standard desk due to the fact that as a standard desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of extras is the move when the core product isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot 42
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the money it’s gon na take to enter a higher end manufacturer like uplift desk or very desk and I haven’t personally used really desk products so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters got here harmed however from a consumer viewpoint you ‘d most likely be actually thrilled to get this in