today we’re taking a look at a motorized sit-stand desk…Flexispot 47 Standing Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not only easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much thought.
On top of being functional, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how durable the Flexispot is.
The practical cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this implied it was going to be strong) and also a little hesitant (due to the fact that all of us understand how much of a challenge putting together furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek look of this desk. I’m positive any of the many varied surfaces that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as close to that as I might on uplifts site with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you need to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for travel through the outdoors container
for the desktop was not harmed in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough man if I had bought this I ‘d have been on the phone with client service immediately they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged too my plan for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at finest feels like a more affordable replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to have a look at their site as well which also feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various options and accessories I might however I think I’m better that they just sent a basic desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot 47 Standing Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and performance however I would invest the extra money it’s gon na take to enter into a higher end manufacturer like uplift desk or extremely desk and I haven’t personally utilized really desk items so I can’t speak on it however their credibility is very good huge thanks to flexi spot for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed but from a consumer perspective you ‘d most likely be truly excited to get this in