today we’re having a look at a motorized sit-stand desk…Flexispot 48″ Electric Height Adjustable Standing Desk Frame Only… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much thought.
On top of being functional, it likewise looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise helpful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (because this suggested it was going to be strong) and likewise a little reluctant (due to the fact that all of us understand just how much of an obstacle putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as put together, I like the streamlined look of this desk. I’m confident any of the many diverse surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
Last but not least, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to sleep on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as near that as I might on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you should understand by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely unusual since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged too my plan for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest feels like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to check out their website as well which likewise feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering different choices and devices I could however I believe I’m happier that they just sent a basic desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of bonus is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot 48″ Electric Height Adjustable Standing Desk Frame Only
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance however I would invest the money it’s gon na take to enter into a higher end maker like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it but their credibility is excellent huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a consumer perspective you ‘d most likely be actually excited to get this in