Find Flexispot 55 X 28 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot 55 X 28… you might have seen my review on the uplift desk, if not …

In general, I must say I like the Flexispot E7.

here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.

It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you do not believe me, take a look at the video below of it running while there’s an individual resting on it.

The electric raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much thought.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also useful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:

The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how sturdy the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both fired up (since this implied it was going to be strong) and also a little reluctant (since all of us understand just how much of a difficulty assembling furnishings can be).

Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.

Once put together, I love the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.

The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as sometimes as you desire throughout the day.

Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.

 

in that video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near to that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you ought to know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable television grommets for travel through the outside container

for the desktop was not harmed in any way which is absolutely bizarre since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had actually bought this I ‘d have been on the phone with customer support instantly they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly definitely where any type of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage dual motor which pushes the cost of the desk up

an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable replica of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their site too which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering different options and devices I might however I think I’m happier that they just sent a standard desk since as a fundamental desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of additionals is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot 55 X 28

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance but I would spend the additional money it’s gon na take to get into a higher end maker like uplift desk or really desk and I haven’t personally utilized very desk products so I can’t speak on it but their credibility is very good big thanks to flexi area for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a consumer viewpoint you ‘d probably be really thrilled to get this in

Published