today we’re taking a look at a motorized sit-stand desk…Flexispot 55… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower feature is not only easy to use and fast, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much idea.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how sturdy the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (given that this suggested it was going to be strong) and likewise a little hesitant (since all of us understand how much of an obstacle assembling furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as many times as you desire throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near that as I might on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you must know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had actually bought this I ‘d have been on the phone with customer service instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged too my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest seems like a cheaper imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to take a look at their website also which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering numerous options and accessories I could however I think I’m better that they only sent out a basic desk because as a fundamental desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of extras is the move when the core product isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot 55
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the extra money it’s gon na take to get into a greater end producer like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it however their reputation is great big thanks to flexi area for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged but from a client standpoint you ‘d probably be really delighted to get this in