today we’re taking a look at a motorized sit-stand desk…Flexispot Adjustable Desk 47… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you don’t think me, take a look at the video below of it running while there’s an individual lying down on it.
The electric raise/lower function is not only easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how durable the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (because this suggested it was going to be tough) and likewise a little hesitant (due to the fact that all of us understand how much of a difficulty assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the smooth appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I could on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had bought this I ‘d have been on the phone with customer service right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but less expensive does not indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged also my prepare for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a less expensive replica of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to take a look at their site also which likewise feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering different options and devices I might however I believe I’m better that they just sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a lot of extras is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Adjustable Desk 47
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance however I would spend the extra money it’s gon na require to enter into a greater end manufacturer like uplift desk or really desk and I haven’t personally used extremely desk items so I can’t speak on it however their credibility is very good huge thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged however from a consumer viewpoint you ‘d most likely be actually thrilled to get this in