today we’re taking a look at a motorized sit-stand desk…Flexispot Adjustable Desk Bike… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Check out the video listed below of it operating while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more cost effective than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t always a substantial fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (because this implied it was going to be tough) and also a little reluctant (due to the fact that we all know how much of a challenge assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you ought to understand by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had purchased this I ‘d have been on the phone with customer care instantly they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however cheaper does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed too my plan for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their site also which likewise feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering different choices and devices I could but I think I’m better that they just sent out a basic desk because as a standard desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of bonus is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Adjustable Desk Bike
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity however I would invest the additional money it’s gon na require to enter a greater end producer like uplift desk or very desk and I haven’t personally utilized really desk items so I can’t speak on it but their track record is great huge thanks to flexi spot for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters got here damaged but from a client perspective you ‘d most likely be truly thrilled to get this in