today we’re taking a look at a motorized sit-stand desk…Flexispot Adjustable Desk Frame… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. If you do not believe me, check out the video below of it running while there’s an individual resting on it.
The electric raise/lower feature is not just easy to use and fast, but it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t always a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this meant it was going to be strong) and also a little hesitant (since all of us know just how much of a challenge assembling furniture can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as lot of times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near to that as I could on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you should know by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely bizarre since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had actually bought this I ‘d have been on the phone with customer care instantly they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely definitely where any type of cable management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double stage dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed also my plan for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to take a look at their site as well which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering different options and accessories I might however I believe I’m better that they only sent out a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of extras is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Adjustable Desk Frame
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity but I would spend the additional money it’s gon na take to enter into a higher end producer like uplift desk or very desk and I haven’t personally used really desk products so I can’t speak on it however their credibility is very good big thanks to flexi area for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed however from a consumer viewpoint you ‘d most likely be really thrilled to get this in