today we’re taking a look at a motorized sit-stand desk…Flexispot Adjustable Height Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being practical, it likewise looks terrific in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise useful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how durable the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this indicated it was going to be sturdy) and likewise a little reluctant (because we all understand just how much of a difficulty assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the sleek appearance of this desk. I’m confident any of the many varied finishes that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as sometimes as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as close to that as I could on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you need to understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had actually purchased this I ‘d have been on the phone with customer care immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually definitely where any kind of cable management products whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged also my prepare for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest feels like a cheaper replica of that it simply doesn’t feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to check out their website as well which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering numerous choices and accessories I might but I believe I’m better that they only sent out a standard desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of extras is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Adjustable Height Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the extra money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I have not personally utilized extremely desk products so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed but from a client perspective you ‘d most likely be truly thrilled to get this in