today we’re having a look at a motorized sit-stand desk…Flexispot Ahorn… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. If you don’t believe me, take a look at the video below of it operating while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are far more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how durable the Flexispot is.
The convenient cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (since this implied it was going to be sturdy) and also a little hesitant (because we all understand how much of a difficulty putting together furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once put together, I like the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as many times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as near to that as I might on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you should know by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with client service immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely absolutely where any kind of cable management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive does not indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged as well my plan for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best seems like a cheaper replica of that it simply does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to take a look at their website also which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering numerous options and devices I could however I think I’m better that they only sent out a basic desk because as a basic desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a bunch of bonus is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Ahorn
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity but I would invest the money it’s gon na require to enter a greater end maker like uplift desk or very desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their credibility is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged but from a client viewpoint you ‘d most likely be truly thrilled to get this in