today we’re having a look at a motorized sit-stand desk…Flexispot Alcoveriser Standing Desk Converter… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. If you don’t believe me, check out the video listed below of it running while there’s a person resting on it.
The electric raise/lower function is not just easy to use and quick, however it’s also remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more budget friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this meant it was going to be durable) and also a little reluctant (since we all understand just how much of a difficulty assembling furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near that as I might on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is utterly strange because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual phase dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control panel that enables up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best feels like a less expensive replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their site also which also feels eerily similar to one of their rivals there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering different choices and devices I might however I think I’m happier that they only sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of extras is the move when the core product isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Alcoveriser Standing Desk Converter
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and productivity however I would spend the additional money it’s gon na require to enter into a higher end producer like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it however their credibility is very good huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed however from a client viewpoint you ‘d probably be actually thrilled to get this in