today we’re having a look at a motorized sit-stand desk…Flexispot Anti Fatigue… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. If you don’t think me, check out the video listed below of it operating while there’s a person lying down on it.
The electrical raise/lower feature is not just easy to use and fast, but it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are much more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t always a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how tough the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (considering that this implied it was going to be durable) and likewise a little reluctant (because all of us know how much of a difficulty assembling furnishings can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I love the sleek appearance of this desk. I’m positive any of the many diverse finishes that it can be found in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as sometimes as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or want to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as near to that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you need to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had acquired this I ‘d have been on the phone with customer support immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually definitely where any type of cable television management materials whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the double stage dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but less expensive does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged as well my plan for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at finest feels like a less expensive imitation of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to check out their site too which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering various options and accessories I could but I think I’m happier that they just sent a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a bunch of extras is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Anti Fatigue
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the money it’s gon na require to enter a higher end maker like uplift desk or very desk and I haven’t personally used very desk items so I can’t speak on it however their credibility is very good huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a client viewpoint you ‘d most likely be truly thrilled to get this in