today we’re having a look at a motorized sit-stand desk…Flexispot Asf… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electrical raise/lower feature is not only easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (since this meant it was going to be durable) and also a little hesitant (because we all know just how much of a difficulty putting together furniture can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I like the streamlined appearance of this desk. I’m confident any of the many varied surfaces that it can be found in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as lot of times as you want throughout the day.
Last but not least, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near to that as I might on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you must understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get lacking even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is entirely unusual because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had acquired this I ‘d have been on the phone with client service right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually definitely where any kind of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best feels like a cheaper replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to have a look at their site too which also feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering different alternatives and accessories I could but I believe I’m better that they just sent a standard desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of bonus is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Asf
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the additional money it’s gon na require to enter a greater end manufacturer like uplift desk or very desk and I haven’t personally used really desk items so I can’t speak on it but their track record is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged but from a client viewpoint you ‘d most likely be actually delighted to get this in