today we’re having a look at a motorized sit-stand desk…Flexispot Aufbau… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. Examine out the video below of it running while there’s a person lying down on it if you don’t think me.
The electric raise/lower feature is not only easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t necessarily a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The hassle-free cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (considering that this implied it was going to be durable) and likewise a little hesitant (due to the fact that all of us know how much of a difficulty putting together furniture can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the sleek appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I could on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely bizarre because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough man if I had bought this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my plan for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their website as well which likewise feels eerily similar to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering numerous alternatives and accessories I could however I believe I’m happier that they just sent out a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of additionals is the move when the core item isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Aufbau
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the additional money it’s gon na take to get into a greater end maker like uplift desk or very desk and I have not personally used really desk items so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a customer viewpoint you ‘d most likely be really thrilled to get this in