today we’re having a look at a motorized sit-stand desk…Flexispot Avis… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s very easy to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. Check out the video listed below of it operating while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower function is not only easy to use and fast, however it’s likewise remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much idea.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (because this indicated it was going to be tough) and likewise a little reluctant (because all of us understand how much of a difficulty putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When put together, I enjoy the smooth appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near to that as I might on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you need to understand by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had purchased this I ‘d have been on the phone with customer care instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however more affordable does not indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged too my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their site too which also feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering different options and devices I might but I think I’m better that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of extras is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Avis
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance however I would invest the extra money it’s gon na take to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized very desk items so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a client standpoint you ‘d probably be truly delighted to get this in