today we’re taking a look at a motorized sit-stand desk…Flexispot Bike Review… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and fast, but it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how durable the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this meant it was going to be durable) and likewise a little hesitant (since all of us understand just how much of an obstacle assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When assembled, I like the smooth look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as sometimes as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as close to that as I could on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you need to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer support immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but less expensive doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged too my plan for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best feels like a cheaper imitation of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their website as well which also feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous options and accessories I could however I think I’m happier that they just sent a standard desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of extras is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Bike Review
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency however I would invest the additional money it’s gon na require to get into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally utilized very desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters got here damaged however from a customer viewpoint you ‘d probably be truly delighted to get this in