today we’re taking a look at a motorized sit-stand desk…Flexispot Biurko… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are far more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how sturdy the Flexispot is.
The practical cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (since this indicated it was going to be strong) and also a little reluctant (due to the fact that all of us know how much of a challenge putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the sleek appearance of this desk. I’m positive any of the many varied finishes that it comes in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I might on uplifts site with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had acquired this I ‘d have been on the phone with customer care right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor double phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable does not indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed also my plan for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at best seems like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to check out their site as well which likewise feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering numerous choices and accessories I might but I think I’m better that they only sent out a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of extras is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Biurko
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance but I would invest the money it’s gon na require to enter a greater end manufacturer like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d most likely be really excited to get this in