today we’re having a look at a motorized sit-stand desk…Flexispot Blackfriday… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s very strong and can hold a lot of weight. Examine out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and fast, but it’s likewise remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are far more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The convenient cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this implied it was going to be sturdy) and also a little hesitant (because all of us understand just how much of a difficulty putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the sleek look of this desk. I’m positive any of the many diverse finishes that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I could on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for travel through the outside carton
for the desktop was not damaged in any way which is utterly unusual due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had acquired this I ‘d have been on the phone with client service instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control panel that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but more affordable does not indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed as well my plan for this desk at this point is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best feels like a more affordable imitation of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to check out their website too which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering various choices and accessories I could however I believe I’m better that they just sent out a fundamental desk because as a basic desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of extras is the move when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Blackfriday
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the additional money it’s gon na require to enter a higher end producer like uplift desk or extremely desk and I have not personally used extremely desk items so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a client perspective you ‘d probably be actually excited to get this in