today we’re taking a look at a motorized sit-stand desk…Flexispot Bs10… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you do not believe me, take a look at the video below of it running while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quick, however it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are even more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t necessarily a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this suggested it was going to be tough) and also a little hesitant (since we all know just how much of a difficulty assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the streamlined look of this desk. I’m confident any of the many diverse finishes that it can be found in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as near to that as I might on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you need to understand by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but less expensive does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed also my plan for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at finest seems like a more affordable replica of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their site as well which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering different alternatives and accessories I could however I believe I’m happier that they just sent out a standard desk because as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Bs10
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the extra money it’s gon na require to get into a higher end maker like uplift desk or very desk and I haven’t personally utilized extremely desk products so I can’t speak on it but their credibility is very good big thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters got here harmed however from a client viewpoint you ‘d probably be really thrilled to get this in