today we’re taking a look at a motorized sit-stand desk…Flexispot Cable Spine… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very simple to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. Check out the video below of it running while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being functional, it likewise looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this meant it was going to be tough) and also a little reluctant (because we all understand how much of a difficulty putting together furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I enjoy the smooth look of this desk. I’m positive any of the many diverse surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near to that as I could on uplifts website with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you must know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for pass through the outside carton
for the desktop was not damaged in any way which is absolutely strange because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had actually purchased this I ‘d have been on the phone with customer service instantly they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but less expensive does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged too my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a cheaper imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to check out their site too which likewise feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering numerous options and devices I could however I believe I’m happier that they just sent out a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of extras is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Cable Spine
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and productivity but I would spend the money it’s gon na take to get into a higher end maker like uplift desk or really desk and I have not personally utilized extremely desk products so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a consumer viewpoint you ‘d probably be actually delighted to get this in