today we’re having a look at a motorized sit-stand desk…Flexispot Chair Review… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s incredibly strong and can hold a great deal of weight. If you don’t think me, have a look at the video below of it running while there’s a person resting on it.
The electrical raise/lower function is not only easy to use and fast, however it’s likewise surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (considering that this implied it was going to be tough) and likewise a little hesitant (since all of us know just how much of a challenge assembling furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I like the smooth look of this desk. I’m confident any of the many varied surfaces that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as lot of times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you must understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had actually acquired this I ‘d have been on the phone with customer support immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any type of cable management materials whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed also my prepare for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at best seems like a cheaper replica of that it just does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to check out their site as well which likewise feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering various options and devices I could but I think I’m better that they only sent out a standard desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Chair Review
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the money it’s gon na take to get into a greater end producer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it but their track record is excellent big thanks to flexi spot for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed but from a consumer standpoint you ‘d most likely be truly thrilled to get this in