today we’re having a look at a motorized sit-stand desk…Flexispot Chair… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to put together, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Check out the video listed below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and fast, however it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The practical cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this meant it was going to be durable) and likewise a little hesitant (due to the fact that all of us know how much of a difficulty putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I like the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as often times as you want throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or want to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable television grommets for travel through the outside carton
for the desktop was not damaged in any way which is entirely bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough guy if I had actually bought this I ‘d have been on the phone with customer care immediately they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function unusually absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double stage dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed as well my plan for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best seems like a less expensive replica of that it simply does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their website also which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering numerous alternatives and devices I might however I believe I’m better that they only sent out a basic desk because as a basic desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of additionals is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Chair
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity however I would invest the extra money it’s gon na take to enter a greater end maker like uplift desk or extremely desk and I have not personally used very desk items so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a customer standpoint you ‘d most likely be actually thrilled to get this in