today we’re taking a look at a motorized sit-stand desk…Flexispot Chat… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electrical raise/lower feature is not only easy to use and fast, however it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being practical, it also looks terrific in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (since this suggested it was going to be tough) and likewise a little hesitant (because we all know how much of an obstacle putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined look of this desk. I’m confident any of the many varied surfaces that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as often times as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or want to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near to that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you ought to know by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is entirely unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had actually purchased this I ‘d have been on the phone with customer support right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually absolutely where any kind of cable television management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual stage double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control panel that permits up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable does not indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed as well my plan for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at best seems like a cheaper replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their site too which likewise feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering numerous alternatives and devices I might however I believe I’m happier that they only sent a fundamental desk because as a basic desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a bunch of extras is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Chat
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity but I would spend the additional money it’s gon na take to get into a greater end manufacturer like uplift desk or extremely desk and I have not personally used extremely desk items so I can’t speak on it but their reputation is great big thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters got here damaged but from a customer standpoint you ‘d most likely be truly excited to get this in