today we’re having a look at a motorized sit-stand desk…Flexispot Cherry Wood… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. If you don’t think me, have a look at the video below of it running while there’s an individual lying down on it.
The electrical raise/lower function is not only easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much idea.
On top of being functional, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (considering that this suggested it was going to be tough) and also a little hesitant (due to the fact that we all know just how much of an obstacle putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
When assembled, I love the sleek look of this desk. I’m confident any of the many varied finishes that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I could on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to understand by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for go through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had purchased this I ‘d have been on the phone with customer care immediately they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely absolutely where any type of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however more affordable does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at best feels like a less expensive replica of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do feel free to take a look at their website also which also feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering numerous alternatives and devices I could however I believe I’m better that they just sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Cherry Wood
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency but I would invest the additional money it’s gon na require to enter into a higher end maker like uplift desk or really desk and I have not personally utilized very desk products so I can’t speak on it however their credibility is very good big thanks to flexi area for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a client standpoint you ‘d most likely be truly delighted to get this in