today we’re taking a look at a motorized sit-stand desk…Flexispot Classic 41 Corner Standing Desk Converter… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a great deal of weight. If you do not believe me, check out the video listed below of it running while there’s an individual resting on it.
The electric raise/lower function is not just easy to use and quickly, but it’s also remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are far more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The practical cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this implied it was going to be tough) and likewise a little reluctant (since all of us understand how much of an obstacle putting together furniture can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I might on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable television grommets for go through the outside carton
for the desktop was not harmed in any way which is entirely unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough guy if I had actually bought this I ‘d have been on the phone with customer support right away they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that enables up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but less expensive doesn’t imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my plan for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at finest feels like a less expensive replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their website as well which also feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering various options and devices I could but I believe I’m better that they just sent out a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this cost point and I do not think slapping on a lot of additionals is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Classic 41 Corner Standing Desk Converter
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the money it’s gon na take to enter a higher end manufacturer like uplift desk or extremely desk and I haven’t personally utilized really desk items so I can’t speak on it however their credibility is very good huge thanks to flexi area for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged but from a customer viewpoint you ‘d most likely be truly thrilled to get this in