today we’re taking a look at a motorized sit-stand desk…Flexispot Cmp502… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. If you do not think me, check out the video below of it operating while there’s an individual lying down on it.
The electric raise/lower function is not just easy to use and quick, but it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much thought.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t always a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how tough the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this implied it was going to be durable) and likewise a little hesitant (due to the fact that we all understand just how much of a challenge assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the streamlined look of this desk. I’m positive any of the many varied surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near that as I might on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer support instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely absolutely where any sort of cable management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive does not suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed as well my prepare for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest seems like a less expensive imitation of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their website as well which likewise feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering various alternatives and devices I could but I think I’m happier that they just sent out a standard desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of extras is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot Cmp502
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity however I would invest the additional money it’s gon na require to get into a greater end manufacturer like uplift desk or really desk and I have not personally used really desk items so I can’t speak on it however their credibility is great big thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a client perspective you ‘d probably be truly excited to get this in