today we’re taking a look at a motorized sit-stand desk…Flexispot Comhar… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Inspect out the video listed below of it running while there’s an individual lying down on it if you don’t think me.
The electric raise/lower feature is not just easy to use and quick, but it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being practical, it also looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are much more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this indicated it was going to be sturdy) and also a little reluctant (since all of us understand just how much of a difficulty putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the smooth look of this desk. I’m positive any of the many diverse finishes that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as lot of times as you desire throughout the day.
Finally, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as near to that as I might on uplifts site with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you should know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had actually acquired this I ‘d have been on the phone with client service instantly they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any type of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double stage dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control board that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift however more affordable doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed as well my plan for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best feels like a less expensive replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their site also which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering numerous choices and accessories I might however I think I’m happier that they only sent a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of bonus is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Comhar
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the extra money it’s gon na require to get into a higher end producer like uplift desk or very desk and I haven’t personally utilized really desk products so I can’t speak on it but their reputation is excellent huge thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters got here harmed however from a client standpoint you ‘d most likely be truly delighted to get this in