today we’re having a look at a motorized sit-stand desk…Flexispot Compact… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. If you do not believe me, check out the video below of it running while there’s an individual lying down on it.
The electrical raise/lower function is not only easy to use and quickly, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much idea.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are far more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (considering that this meant it was going to be sturdy) and likewise a little hesitant (because we all know how much of a challenge assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near to that as I could on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is entirely bizarre because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had acquired this I ‘d have been on the phone with customer service instantly they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually definitely where any sort of cable management products whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed too my plan for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at finest feels like a less expensive replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to have a look at their website also which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering different choices and accessories I could however I believe I’m better that they only sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of bonus is the relocation when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Compact
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the extra money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used really desk items so I can’t speak on it but their track record is great huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed but from a consumer perspective you ‘d most likely be truly excited to get this in