today we’re taking a look at a motorized sit-stand desk…Flexispot Contact Us… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how durable the Flexispot is.
The convenient cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this indicated it was going to be tough) and likewise a little hesitant (due to the fact that we all understand how much of a difficulty putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the sleek look of this desk. I’m positive any of the many varied finishes that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you ought to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is entirely bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough male if I had actually purchased this I ‘d have been on the phone with customer service instantly they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double phase dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is absolutely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed too my plan for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best seems like a more affordable replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their site too which likewise feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering different alternatives and devices I might but I believe I’m happier that they only sent out a standard desk since as a basic desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of additionals is the relocation when the core product isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Contact Us
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance however I would invest the money it’s gon na take to enter into a higher end maker like uplift desk or very desk and I have not personally utilized really desk items so I can’t speak on it however their track record is great huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged however from a client standpoint you ‘d most likely be actually excited to get this in