today we’re taking a look at a motorized sit-stand desk…Flexispot Control Panel… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s very strong and can hold a lot of weight. Inspect out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not just easy to use and fast, but it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise helpful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (since this meant it was going to be sturdy) and also a little hesitant (since all of us understand how much of a difficulty putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I like the sleek look of this desk. I’m positive any of the many varied surfaces that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I might on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to know by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is utterly unusual since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had actually bought this I ‘d have been on the phone with customer care immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly definitely where any sort of cable management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage style that comes standard with the uplift desk this can be updated as well to both the double phase double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control panel that permits up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my prepare for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best feels like a more affordable replica of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their site also which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering different choices and devices I could however I believe I’m better that they just sent out a standard desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a lot of additionals is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is 7 years if you are Flexispot Control Panel
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the additional money it’s gon na require to enter into a greater end producer like uplift desk or really desk and I haven’t personally used very desk items so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged but from a consumer viewpoint you ‘d most likely be truly excited to get this in