today we’re having a look at a motorized sit-stand desk…Flexispot Converter… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to put together, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Check out the video listed below of it running while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not just easy to use and fast, however it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise useful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (considering that this suggested it was going to be sturdy) and also a little reluctant (due to the fact that all of us know just how much of a challenge putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined look of this desk. I’m confident any of the many varied finishes that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as many times as you desire throughout the day.
Finally, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near to that as I could on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you must know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had acquired this I ‘d have been on the phone with customer care immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely definitely where any sort of cable management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double stage double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed too my prepare for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a cheaper replica of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their site also which likewise feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering numerous options and accessories I might however I think I’m happier that they only sent out a fundamental desk since as a basic desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of additionals is the move when the core item isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Converter
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance but I would spend the money it’s gon na take to enter a higher end producer like uplift desk or very desk and I haven’t personally utilized very desk items so I can’t speak on it however their track record is excellent big thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters got here damaged however from a customer viewpoint you ‘d most likely be actually thrilled to get this in