today we’re taking a look at a motorized sit-stand desk…Flexispot Crank Standing Desk H1… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s incredibly sturdy and can hold a great deal of weight. If you do not believe me, check out the video below of it running while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quick, but it’s also surprisingly smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t necessarily a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how strong the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this implied it was going to be tough) and also a little hesitant (because we all understand just how much of an obstacle assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek look of this desk. I’m positive any of the many diverse finishes that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
Finally, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as near that as I might on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you must know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is utterly bizarre due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough guy if I had actually bought this I ‘d have been on the phone with customer support right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any sort of cable television management products whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but more affordable does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at best feels like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their website too which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering various choices and accessories I might but I think I’m happier that they only sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of bonus is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Crank Standing Desk H1
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and performance however I would spend the money it’s gon na take to get into a greater end producer like uplift desk or very desk and I have not personally used really desk products so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a client standpoint you ‘d most likely be truly excited to get this in